Easy to cut, easy to fasten
Construct strong, modifiable structures with these round aluminium profiles and fasteners.
D30 Profiles
Tube D30 and Profile Tube D30 form the base structure of most designs. Simply cut to size and fit together.
Profile Tube D30 would typically be used as the verticals and also for any additional fasteners. The ridges on the surface of Profile Tube D30 connect perfectly with the D30 fasteners and accessories, making construction very straightforward.
Profile 6 D30 connects with our standard range of Profile 6 fasteners and accessories.
The profiles can be cut to length upon ordering or buy in bulk to save on costs.
Profile 6 D30, natural
0.0.616.46
Max. L = 6000mm
Profile Tube D30, natural
0.0.628.28
Max. L = 6000mm
Tube D30, natural
0.0.628.56
Max. L = 6000mm
D30 Fasteners
Intelligent fasteners that make it incredibly easy to construct a diverse range of equipment. All you need is a 5mm Hex Key to fasten your structure.
Retrofitting is made possible with the Transverse Fastener D30.
Heavy loads are held stable with Parallel Fasteners and Bracing Struts.
Fastener D30
0.0.623.56
Angle Fastener D30
0.0.630.60
End Connector 8 D30-90°
0.0.629.97
Bracing Strut D30-90°
0.0.629.95
Multiblock D30
0.0.629.96
Panel Fastener D30
0.0.630.74
Parallel Fastener D30
0.0.629.94
Table Top Fastening Bracket D30
0.0.647.11
Transverse Fastener D30
0.0.637.90
Tube Clamp D30, grey
0.0.630.83
Fastening Set 8 D30
0.0.653.82
Plain Bearing D40/D30-50 ESD
0.0.665.36
Fastener D30-45°
0.0.637.87
Anti-torsion Block 6 D30
0.0.630.39
Anti-torsion Block 6 D30-45°
0.0.630.40
D30 Adapters
Three ways to adapt:
1. Easily connect an existing tube structure with our range of products using either the Adapter D30/D28-37 or D30/D28-25.
2. Turn a smooth tube into a grooved tube using Tube Adapter D30.
3. Connect fastening elements to any flat surface or Profile 8 grooves with the Adapter 8 D30.
Adapter 8 D30
0.0.630.51
Adapter D30/D28-25
0.0.642.62
Adapter D30/D28-37
0.0.638.88
Tube Adapter D30
0.0.630.61
D30 Caps
Cap 6 D30 and Cap Tube D30 cover the end face of the profiles, keeping dust and foreign objects out of the tubes and enhancing the overall design.
Cap D30 R slides perfectly into the side of a fastener D30, creating a flat, tamper-free surface after the fastener has been tightened.
Cap 6 D30, grey
0.0.634.45
Cap D30 R, grey
0.0.624.11
Cap Tube D30, grey
0.0.629.78
D30 Feet and Castors
Create movable shelving systems, trolleys and conveyors with Castors.
Alternatively, Knuckle Feet ensure a stable frame, even on uneven surfaces due to height adjustable threads and ball joints.
Castor D75 with Brake
1.1.646.07
Knuckle Foot D30, M6x60
0.0.434.51
Threaded Insert D30 M10
0.0.634.36
Threaded Insert D30 M6
0.0.641.00
D30 Label Holders
Continuity of labelling makes for an efficient workplace.
Two self-adhesive Label Holder types are available:
1. ‘Flex’ hangs below the tube.
2. ‘Non-flex’ wraps around the tube.
Label Holder D30-100 Flex, transparent
0.0.644.71
Label Holder D30-100, transparent
0.0.644.69
Request a quote today
Call or email us to discuss what you need.